Heavy-Duty 14 Inch (355mm) Chop Saw:

15.0 Amp/5.3 HP motor provides more overload capacity, increasing performance and durability.

Specifications:

• No Load Speed: 3,800 rpm
• No Load Speed: 3,800 rpm
• Spindle Lock
• Quick Lock Vise
• Wheel Arbor: 1"
• Wheel Diameter: 14"
• Max Capacity (Round): 5"
• Max Capacity (Rectangular): 4-1/2" x 6-1/2"
• Tool Length: 21"
• Tool Weight: 40.0 lbs

14” Metal Cutting Wheel

Recommended at least 4 for single house project (multiply by number of houses).

Circular Saw

Specifications:

• 7-1/4” Diameter
• 15.0 Amp motor
• Operates at 5800 RPM
• 50 Degree bevel capacity
• 2-7/16" Depth of cut at 90 degrees

Recommended 1 ea. per project.

7-1/4” Carbide Tipped Blade

Recommended 2 ea. per single house project.

7-1/4" Diameter 6 Tooth PCD Diamond Fiber Cement Blade

Recommended 1 per single house project.

10 AMPS Reciprocating Saw

Specifications:

• Mps: 10.0 amps
• Strokes/Min: 0-2,400 spm
• Stroke Length: 1-1/8"
• Tool Length: 17.25"
• Counter Balance: N/A
• Keyless Blade Clamp

Metal Cutting Blades

Utility Blades

Plasma Cutter

Light weigth and multi-voltage-plug

Metal 9” Dia. Angle Grinder Metal Cutter

Recommended 1 or 2 ea. per project.

9" Blades

Recommended at least 5 for single house project (multiply by number of houses).

Versa-Clutch Corded Reversible Screwdriver

Specifications:

• Torque adjacent clutch
• 8 foot-2 conductor cord
•  6.5 amps at 120 volts

Recommended at least 2 for single house project (multiply by number of houses).

Heavy-Duty XRP 18V Cordless Light Gauge Steel Framing Screwdriver:

Tool is designed for steel a fastening application that is ideal for use in 12-28 gauge CRS.

Specifications:

• 18 Volts
• 0-900/0-2,700 rpm
• 180 Max Torque
• 12-28 ga. CRS
• 5.4 Lbs.
• Includes: 1 hour charger, (2) 18 volt batteries, 2 Phillips screwdriver bit, 5/16 nut runner, kit box

Recommended 1 per person (Minimum 6 to 8 per single house project).

Power Drill Batteries

Recommended twice the number of screwdrivers purchased.

Magnetic Drill Bit Holder

Recommended 1 ea. per screwdriver (2 ea. extra per project).

Magnetic Nut Setter Bits (left picture)

No. 2 Screw Bits (right picture)

Recommended at least 50 ea. for single house project (multiply by number of houses).

Hammer Drill with Multi-position Side Handle and Depth Rod

Specifications:

• ½” chuck
• 0 -1,000/0-2,500 RPM
• Drilling concrete to insert anchor bolt rods

Recommended 1 ea. per project.

Concrete drill bit

Recommended 2 ea. per project.

Single Shot Power Actuated

Recommended 1 ea. per project with 200 rounds of power cartridge.

Ael-900 with Detector

Compensated self leveling LASER

Recommended 1 ea. per project attached to a matching tripod.

Cordless Finishing Gun

Fastener range 3/4" to 2-1/2", 11.75" x 12.5"

Recommended 1 ea. per project with 2,500 shots per single house project.

Cellulose Insulation Application Equipment

Hose, wall shaver, nozzle with remote switch and other accessories included. Unit comes complete and ready to use.

Recommended 1 ea. per project.

Fiber Cement Cutting Shears

The KC-193 variable speed 5.5 amp model comes with the heavy duty steel cutting head to provide fast cutting of up to 1/2" backer board or fibercement board with no airborne dust and minimal clean-up. The long lasting A-2 tool steel blades last longer and cut cleaner than expensive carbide tipped saw blades.

Recommended 1 ea. per project.

8000 Watt Electric Start Generator with Cord

25 Foot Gen-Cord included, one end connects to 30 amp (240 volt) twist lock outlet and other end splits into FOUR 120 volt household plugs. Starts with a simple touch of a button. Battery and battery float charger included. 7 gallon metal gas tank generates up to 10 hours of electricity at half load. Includes 12” pneumatic wheels and twin fold-down handles.

Specifications:

• Model: 30244
• Frequency: 60 Hertz
• Engine: 15-HP Generac OHV
• Auto voltage regulation
• Low oil alert
• Weight: 198 lbs
• Dimensions: 33.5” L x 20.25” W x 24.25” H

Recommended 1 ea. per project.